Sprayable Vinyl Wrap

Spray full dip smoked vinyl yellow is especially recommended for smoking headlights or any other surface!

Features:

• Spray-applied liquid vinyl that once dry becomes a tough, durable elastic film.
• It can be removed easily.
• It can be cleaned with most soaps, and resists water, mud, cleaning with pressure water, etc.
• It doesn’t fit, it doesn’t take off, over time.
• A really fast drying, with great flexibility once dry.
• Water-resistant.
• Easy to remove and without leaving any rest, looking after the friction surfaces.
• It can be used both inside and outside.
• A Full Dip 400 ml spray covers up to 1.2 m².
• Full Dip is higher quality than Plasti Dip and cheaper than Plasti Dip.

How to use:

• First, the surface where we are going to apply Full Dip must be well dry, and clean, without any material that does not facilitate its adherence.
• First shake the boat vigorously for a few minutes, before spraying the product.
• Later leave at rest for 1 minute to prevent bubbles from forming.
• Apply various layers of liquid vinyl, we recommend letting rest and dry for 10 to 30 minutes between layer and layer depending on temperature.
• Finally, a minimum of 4 layers are recommended.
• Finally, total drying is 24 hours.

Technical information:

• Therefore, avoid exposing the spray bottle to more than 50 °C
• With all this, the optimal application temperature is between 5 °C and 35 °C (during application try to avoid very low or very high temperatures).
• The minimum contact time between applications is 10 minutes approximately.
• About the drying time: 1 hour, depending on each layer and the thickness of them (approximately 0.2mm) and the number of layers applied can be higher.
• Duration after applying liquid vinyl: from 1 year to 3 years according to weather conditions and external agents.
• Therefore, each spray bottle contains 400 ml.